Guide for measuring your walls
All you have to do is measure the width and height of the entire wall. We always produce your wallpaper in the exact measurements you specify when ordering. Additionally, before printing, we add an extra inch on each side of your provided measurements to accomodate for slightly uneven wall dimensions.
Please see these cases for tips on measuring different types of walls.
Measure the width and height of the entire wall. Please double-check your work to ensure accuracy. We will add an extra inch on all four sides to accomodate for slightly uneven walls.
Measure the wall from the highest and widest point, ignoring any slopes. The wallpaper will be printed and delivered as a whole rectangle or square, with the sloped portion to be removed during installation. We will add an extra inch on all four sides to accomodate for slightly uneven walls.
Measure the wall along its longest length in both width and height. The mural will be created as a whole rectangle or square, with the sloped portion removed during installation. We will add an extra inch on all four sides to accomodate for slightly uneven walls.
Take the width and height of the entire wall. During installation, all impediments will be removed. We will add an extra inch on all four sides to accomodate for slightly uneven walls.
When ordering, measure the width of each of your walls and add them together. You do not need to order the wallpaper in two parts. We will add an extra inch on all four sides to accomodate for slightly uneven walls.
When measuring the height of a sloped wall, please identify the highest and lowest point of the wall. The same is true for the width. During installation, all sloped parts will be removed. We will add an extra inch on all four sides to accomodate for slightly uneven walls.
We have a large selection of creative and well-designed wallpapers for all of your needs. You must choose the design that you prefer the most. For customized wallpapers you can upload your own images and continue with the reset of the process below.
You must enter the height and width measurements of your wall or the location where you want to stick your wallpaper.
After entering the height and width, we proceed to the cart, where all of the product information, including price and measurement, is displayed. Finally, we proceed to the checkout, where you can finish your order by making the payment.
Our designers will generate a digital proof for you to review and request changes / corrections. Once you are happy with the proof we will then proceed to print and ship to you. Incase you are not happy with the design proof you may change the designs at no additional cost or ask for a 100% refund, no questions asked.
Wallpaper ordering guide
Inorder to place an order with Magicdecor you will first need to choose a design (or upload your own photo), then enter your wall measurements, add it to your shopping cart, and then proceed to checkout.
It's really quite simple once you get the hang of shopping in a virtual space. However, if you are a beginner, we have some basic instructions for you below.
Please see these cases for tips on measuring different types of walls.
Steps for wallpaper application
This manual describes the essential steps to apply the wallpaper rolls. Please follow this manual to understand how to apply our custom-printed wall murals.
Your wallpaper order will also contain a detailed installation guide which you can follow to install the wallpapers.
Ensure that the wallpaper rolls are in proper condition without any defect or damage. The non-woven mixture is used as an adhesive to apply the wallpapers.
The wallpapers are installed from left to right and it is initiated by applying from the left corner of your wall. The sheets should be hung from one edge to the other without causing any overlapping. Please ensure the first length of the wallpaper is vertically straight.
Make sure to remove any air bubbles after pasting one sheet. Removing the air bubbles gives the wallpapers a smooth texture as well as a finished appearance.
Apply the non-woven mixture onto the wall and secure every inch of the wall is covered with the paste. If any of the spots are missed out, it will create air bubbles in the wallpaper sheets. The wallpapers need to be pasted in one area and should cover one and a half lengths at one go.
Ensure that the wallpaper rolls are in proper condition without any defect or damage. The non-woven mixture is used as an adhesive to apply the wallpapers.
After the application, the entire wallpapers need to be cleaned. While applying make certain that the non-woven paste doesn’t damage the front of the wallpaper. If there is a situation like this, the excess paste should be removed immediately using a wet wallpaper sponge.
Once the application of the wallpaper is complete, remove the extra portions of the sheets from the ceiling and floor.
For removing the excess parts use a sharp knife preferably the one form our installation kit. In the end, the room should be left ventilated and should be kept at a normal temperature for 24 hours to allow the wallpaper to dry easily.
Wallpapers look perfect on the walls when the surface is smooth, clean with no unevenness and moisture on it.
The wallpaper sheets are directly pulled towards the ceiling at the time of application. They should hang straight and forcing the strips together should be avoided. If there is any problem during the application, it is better to remove the strips and reattach the sheets again if the edges do not meet.
